Find out the size of the ring
Sometimes it is necessary to know the size of the ring suitable for a person’s finger, either because of the occasion of marriage, or to buy a ring as a gift, or when the purchase of a particular ring through the websites, so we will provide you in this article ways to measure the size of the ring, easy and simple, It is possible to know the size of the ring using two methods, namely:
Calculate finger size
Materials used:
To measure finger size, we need the following tools:
- Adhesive tape.
- Pencil or pen, or any other type that can be written on the adhesive tape.
- A small ruler, enough to be 15 cm long.
Measurement method:
- Take the adhesive tape and wrap it around the finger where the ring is worn.
- Mark at the junction of the ends of the adhesive tape.
- Remove the adhesive tape from the finger, taking care not to wipe the mark.
- Place the adhesive tape along the length of the ruler, measure the distance between the beginning of the adhesive tape and the mark that has been placed, taking care to take the distance by millimeter.
- Thus, you will get the finger perimeter, so when you go to buy a particular ring, it is preferable to choose a larger size than measured, taking care to try on the hand before purchase.
Calculate the size of the ring itself
To measure the size of the ring itself, you should look at the length of the inner diameter trapped between the edges, and also using the adhesive tape, and put it along the internal distance, and using the pen is marked at the end point, and then re-paste the tape on the ruler to see the length, or possible use the ruler from the beginning and place it on the ring, taking the measurement.
Directions for measuring the ring
There are a set of tips that we provide you, before you do the measurement process which includes the following:
- It is preferable to take the measurement from the same ring in the case of straight rotation, and does not contain any curves that lead to a wrong result and inaccurate.
- Some people use the thread in the measurement process, so it is worth noting that it is not trustworthy, because the thread will slip or is difficult to control, and there are those who use paper which is not also a good way, where it can bend or rupture, thus giving an inaccurate result.
- Take readings and measurements of the finger or ring perimeter more than once to make sure that the correct result is obtained. Repeat the measurement at least three times.
- There are many factors that affect the size of the finger. If the weather is cold it will shrink and the finger will shrink, and the high temperature will lead to finger enlargement, so be careful to take the measurement of the finger in the case of rest, and when the body temperature is normal and moderate.