Manufacture of accessories
Women and girls used to make their own accessories and adornments. Each region was known for its popular accessories, which were made by women from grandmothers to granddaughters. With the development of time and the multiplicity of raw materials used in this field, many accessories appeared in many forms and types. What is the result of manual work on a good degree of perfection and creativity.
Manufacture of hand-made accessories of threaded screws
Materials needed
- 16 pieces of medium-sized bolts and uniform color, preferably silver or golden color.
- Thick copper wire in color matching the color of the screws.
- Thick and solid thread in a beautiful and bright color.
- Wire cutter.
The method of work
- Four pieces of bolts are lined with each other in a longitudinal line.
- Three pieces of bolts are marked on the right side of the four-length longitudinal line, taking into account the three pieces of the first longitudinal line, and three others on the left side in the same manner.
- Put two pieces of bolts on the outer sides to cut the thickness of the previous bolts, taking into account each side.
- One piece of screws is fixed on the middle point of the outer sides to cut the thickness of the previous bolts, and a certain shape of the screws can be observed.
- Each piece of bolts is fixed with the adjacent piece of the four sides using copper wire, until a certain shape is attached to each other.
- The thick thread cuts only two equal halves, and the ends of each thread are tied with a piece of bolts in the base.
- Wrap the hand-made accessory around the wrist and tie the string around tightly.
Make hand accessories from small pins
Materials needed
- A combination of safety pins in a small size and uniform measurement.
- A collection of colored small beads.
- Solid rubber thread.
- Thin needle.
The method of work
- Open the safety pins and fill with colored beads from both sides until they are fully filled, then close tightly to prevent the beads from falling.
- The solid rubber thread is cut in a suitable length to rotate the wrist, and then another elastic thread is cut in length.
- The colored pins are placed behind each other on the first rubber thread, then the rubber thread is firmly attached to the ends.
- Insert the second rubber thread with a fine needle and then pass sequentially through the circular part located below the safety pins filled with the first rubber thread.
- Attach the two sides of the second rubber thread tightly.